User Manual

User’s Manual of LRP-822CS/LRP-1622CS
334
The page includes the following fields:
Object Description

There are three modes for PoE mode.
PoE Mode
 : enable PoE function. Enable
 Disable: disable PoE function.
 : enable PoE function in schedule mode.Schedule
 Schedule
Indicates the scheduled profile mode. Possible profiles are:
 Profile1
 Profile2
 Profile3
 Profile4
 Priority
nts PoE ports priority. There are three levels of power priority
The priority is used in case the total power consumption is over the total power
budget. In this case the port with the lowest priority will be turned off, and offer
The Priority represe
named Low, High and Critical.
power for the port of higher priority.
 Current Used [mA]
The Power Used shows how much current the PD currently is using.
 Power Used [W]
rently is using. The Power Used shows how much power the PD cur
 Power Allocation
It can limit the port PoE supply watts. Per port maximum value must be less
value. Once power overload is detected, the port will auto shut down and keep
in detection mode until PD’s power consumption is lower than the power limit
value
than 30.8 watts. Total port values must be less than the Power Reservation
Buttons
: Click to apply changes.