User Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN setting example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 Quality of Service
- 4.9 Security
- 4.10 ACL
- 4.11 MAC Address Table
- 4.12 LLDP
- 4.13 Diagnostics
- 4.14 RMON
- 4.15 Power over Ethernet
- 4.16 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A
- EC Declaration of Conformity
User’s Manual of LRP-822CS/LRP-1622CS
328
4.14.5 RMON History
Configure RMON History tab 4-8 appear.
le on this page. The RMON History screens in Figure 4-14-7 & Figure 4-1
Figure 4-14-7: RMON History Table Page Screenshot
The page includes the following fields:
Object Description
Select Index
w index or modify the indexSelect index from this drop-down list to create the ne
Index
Indicates the index of the history entry
Sample Port
Select port from this drop-down list
Bucket Requested
Indicates the maximum data entries associated this History control entry stored in
nge is from 1 to 50, default value is 50 RMON. The ra
Interval
ng the history statistics data. The
alue is 1800 seconds.
Indicates the interval in seconds for sampli
range is from 1 to 3600, default v
Owner
Specify an owner for the history
Buttons
: Click to apply changes.
Figure 4-14-8: RMON History Status Page Screenshot