User Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN setting example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 Quality of Service
- 4.9 Security
- 4.10 ACL
- 4.11 MAC Address Table
- 4.12 LLDP
- 4.13 Diagnostics
- 4.14 RMON
- 4.15 Power over Ethernet
- 4.16 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A
- EC Declaration of Conformity
User’s Manual of LRP-822CS/LRP-1622CS
296
Buttons
: Click to add new MAC filtering setting.
Figure 4-11-4 Statics MAC Status Page Screenshot
The page includes the following fields:
Object Description
This is the number for entries
No.
MAC Address
The MAC address for the entry
VLAN
The VLAN ID for the entry
Delete
Click to delete static MAC status entry.
By default, dynamic entries are removed from the MAC table after 300 seconds. The Dynamic Address Setting/Status screens
4.11.3 Dynamic Address Setting
in Figure 4-11-5 & Figure 4-11-6 appear.
Figure 4-11-5 Dynamic Addresses Setting Page Screenshot
he page includes the following fields: T
Object Description
Aging Time
which a learned entry is discarded The time after
(Range: 10-630 seconds; Default: 300 seconds)