User Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN setting example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 Quality of Service
- 4.9 Security
- 4.10 ACL
- 4.11 MAC Address Table
- 4.12 LLDP
- 4.13 Diagnostics
- 4.14 RMON
- 4.15 Power over Ethernet
- 4.16 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A
- EC Declaration of Conformity
User’s Manual of LRP-822CS/LRP-1622CS
250
he switch also updates the entries in the binding file. The frequency at which the file is updated is based on a configurable
delay, and the updates are batched. If the file is not updated in a specified time (set by the write-delay and abort-timeout values),
the update stops.
The DHC ing Database and Inform in Figure 4-9-40 & Figure 4-9-41 appear.
T
P Snoop ation screens
Figure 4-9-40 DHCP Snooping Database Setting Page Screenshot
The page includes the following fields:
Object Description
Database Type
Select database type
File Name
The name of file image
Fill in
your remote server IP address
Remote Server
Write Delay
Specify the duration for which the transfer should be delayed after the binding
).
database changes. The range is from 15 to 86400 seconds. The default is 300
seconds (5 minutes
Timeout
Specify when to stop the database transfer process after the binding database
changes.
The range is from 0 to 86400. Use 0 for an infinite duration. The default is 300
seconds (5 minutes).
Buttons
: Click to apply changes.