User Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN setting example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 Quality of Service
- 4.9 Security
- 4.10 ACL
- 4.11 MAC Address Table
- 4.12 LLDP
- 4.13 Diagnostics
- 4.14 RMON
- 4.15 Power over Ethernet
- 4.16 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A
- EC Declaration of Conformity
User’s Manual of LRP-822CS/LRP-1622CS
230
The page includes the following fields:
Object Description
Server Definition
Set the server definition
Server IP
Address of the TACACS+ server IP/name
Server Port
Network (TCP) port of TACACS+ server used for authentication messages.
(Range: 1-65535; Default: 49)
Server Key
The key is shared between the TACACS+ Authentication Server and the switch.
T
he number of seconds the switch waits for a reply from the server before it
quest.
Server Timeout
resends the re
Server Priority
Set the server priority
Buttons
: Click to add RADIUS server
setting.
Figure 4-9-15 Login Authentication List Page Screenshot
The page includes the following fields:
Object Description
IP Address
Display the current IP address
Port
Display the current port
Displ
ay the current key
Key
Timeout
Display the current timeout
Retries
Display the current retry times
Priority
Display the current priority