User Manual

Table Of Contents
User’s Manual of LRP-822CS/LRP-1622CS
154
ng
This page allows you to configure per p t. The CIST Port Setting and Status screens in Figure 4-6-10 &
4.6.5 CIST Port Setti
ort CIST priority and cos
Figure 4-6-11 appear.
Figure 4-6-10 CIST Port Setting Page Screenshot
The page includes the following fields:
Object Description
Port Select
Select port number from this drop-down list.
Priority
Controls the port priority. This can be used to control priority of ports having
identical port cost. (See above).
Default: 128
Range: 0-240, in steps of 16
Internal Path Cost
(0 = Auto)
etting will set the path cost
as appropriate by the physical link speed, using the 802.1D recommended
values. Using the Specific setting, a user-defined value can be entered. The
ed when establishing the active topology of the network. Lower
warding ports in favor of higher path cost ports.
Valid values are in the range 1 to 200000000.
Controls the path cost incurred by the port. The Auto s
path cost is us
path cost ports are chosen as for
Buttons
: Click to apply changes.