Quick Guide

8
ThepreviouscommandwouldapplythefollowingsettingsfortheSwitch.
IPAddress:192.168.1.100
SubnetMask:255.255.255.0
Gateway:192.168.1.254
Figure 5-2: IP Address Screen
5.RepeatStep1tocheckiftheIPaddressischanged.
If the IP is successfully congured, the LRP Managed Switch will apply the new IP
addresssettingimmediately.Youcanaccess the Webinterfaceofthe LRPManaged
SwitchthroughthenewIPaddress.
Note
If you are not familiar with console command or the related
parameter,enter“?”anytimeinconsoletogetthehelpdescription.