Datasheet

Data Sheet
1
LRP-1622CS
1
16-port Coax + 2-port 10/100/1000T + 2-port 100/1000X
SFP Long Reach PoE over Coaxial Managed Switch
PLANET Long Reach PoE Solution enables all enterprises and network service
providers to set up an IP infrastructure in a remote location where 802.3af/at PoE
compliant powered devices can receive both data and power via PLANET switches, and
PLANET LRP extenders and injectors over a long distance but not limited to the normal
100 meters.
Intelligent Long Reach PoE Switch on Coaxial-based Network
PLANET LRP-1622CS, a brand-new Multi-channel Long Reach PoE Switch, features
an extended Ethernet and PoE networking of up to 1 kilometer over the existing coaxial
cables going to multiple PoE compliant devices. It provides IPv6/IPv4 dual stack
management and built-in L2/L4 Gigabit Switching engine along with 16 BNC ports with
Long Reach PoE Injector function, 2 Gigabit copper ports and 2 extra 100/1000BASE-X
SFP fiber slots. Each of the 16 BNC ports provides 36 watts of power with a total
power budget of up to 440 watts. As an advanced PoE switch, the LRP-1622CS
features intelligent PoE functions to improve the availability of critical applications. It
provides a quick, safe and cost-effective PoE network solution to upgrading the existing
coaxial cable infrastructure from the analog system to the HD IP surveillance system.
Physical Port
• 16 100Mbps BNC female ports with Long Reach PoE Injector
function
• 2 10/100/1000BASE-T Gigabit RJ45 copper ports
• 2 100/1000BASE-X mini-GBIC/SFP slots
• RJ45 console interface for switch basic management and setup
Long Reach Power over Ethernet
• Supports PoE power up to 36 watts for each PoE port
• Remotepowerfeedingupto 1kilometerwith5C2V/RG675Ω
coaxial cable
• Long Reach PoE Management
–
Total Long Reach PoE power budget control
–
Per port Long Reach PoE function enable/disable
–
Long Reach PoE port power feeding priority
–
Per Long Reach PoE port power limitation
–
Long Reach PD alive check
–
Long Reach PoE schedule
Layer 2 Features
• Prevents packet loss with back pressure (half-duplex) and IEEE
802.3xpauseframeowcontrol (full-duplex)
• High performance Store and Forward architecture, broadcast storm
control,runt/CRClteringthateliminateserroneouspacketsto
optimize the network bandwidth
• Supports VLAN
–
IEEE 802.1Q tagged VLAN
–
Provider Bridging (VLAN Q-in-Q, IEEE 802.1ad) support
–
Protocol VLAN
–
Voice VLAN
–
Private VLAN
–
Management VLAN
–
GVRP
• Supports Spanning Tree Protocol
–
STP (Spanning Tree Protocol)
–
RSTP (Rapid Spanning Tree Protocol)
–
MSTP (Multiple Spanning Tree Protocol)
–
STP BPDU Guard, BPDU Filtering and BPDU Forwarding
• Supports Link Aggregation
–
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
–
Cisco ether-channel (static trunk)
–
Maximum 4 trunk groups, up to 4 ports per trunk group
• Provides port mirror (many-to-1)
• Loop protection to avoid broadcast loops
Quality of Service
• Ingress/egress rate limit per port bandwidth control
• Storm control support
–
Broadcast / unknown unicast / unknown multicast
RJ45 Type Console Port
2 x 10/100/1000BASE-T
2 x 100/1000BASE-X SFP Slot
16 x 100Mbps Long Reach PoE BNC Port