User Manual

9
3.4 LED Indicators
External Power Supply
LED Color Function
P1 Green Lights to indicate power 1 has power.
P2 Green Lights to indicate power 2 has power.
FAULT Red
Lights to indicate either power 1 or power 2 has no
power.
PoE Usage
LED Color Function
10W Green Lightstoindicatethepowerusageis≥10W.
20W Green Lightstoindicatethepowerusageis≥20W.
30W Green Lightstoindicatethepowerusageis≥30W.
40W Green Lightstoindicatethepowerusageis≥40W.
LRP Interface
LED Color Function
PWR Green Lights to indicate the power is on.
LNK Green
Lights to indicate that the Coaxial/UTP link is
established.
Off: indicates that the Coaxial/UTP link is down.
RJ45 10/100 BASE-TX Interface
LED Color Function
PoE
In-Use
Orange
Lights to indicate the RJ45 port is providing PoE power.
10/100
LNK/ACT
Green
Lights to indicate the link through that port is success-
fully established at 10/100Mbps.
Blinks to indicate that the port is actively sending or
receiving data.
Off: indicates that the port is link down.