User Manual

21
Functions
LRP Switch LRP Extender
LRP-822CS/LRP-1622CS LRP-104CET
Power Input
Power cord with AC 100~240V,
50/60Hz, auto-sensing
BNC with DC power over
coaxial input
Power Output
BNC with DC power over coaxial
output
RJ45 with 802.3at/af PoE
output
Installation Instructions
Step 1. Connect the LRP Switch (LRP-822CS/LRP-1622CS) and LRP Extender
(LRP-104CET) to ends of BNC terminated coaxial cable.
Step 2. Connect 100~240V AC power cord to LRP Switch (LRP-822CS/
LRP-1622CS) power socket, then the PWR LED of LRP Switch
(LRP-822CS/LRP-1622CS) should be lit up immediately.
 The LRP Managed Switch is congured DISABLED Long Reach PoE
function as default. So you must Enable Long Reach PoE function for
all LRP ports from WebUI.
Step 3. After enabling the LRP function of LRP Switch (LRP-822CS/
LRP-1622CS) from WebUI, the PWR LED of LRP-104CET should be lit
up immediately.
Step 4. Connect Cat5/6 UTP cable to LRP-104CET and IEEE 802.3at/af
complied PoE IP camera or PoE Wireless AP.
Note
Additional advanced settings for the LRP Switch (LRP-822CS /
LRP-1622CS) can be downloaded from the PLANET website or
contact the PLANET support team.
6.2 Applications of LRP-101U-KIT with UTP/Twisted-pair Cable
Type 1 LRP-101UH with PoE power input and LRP-104CET with PoE power
output
802.3af/802.3at PoE
PoE IP Camera
LRP-104CET
Long Reach PoE Extender
P1 P2 Fault
PWR
LNK
LRP IN
4
3
2
1
LRP-104CET
Ext.
PWR
10W 20W 30W 40W
PoE
Power
Usage
ACTLNK
PoE In-use
ON
ON
ON
ON
OFF
OFF
OFF
OFF
1
Port PoE
2
3
4
Long Reach PoE
Extender
1 2 3 4
OFF
802.3af / 802.3at
PoE Switch
PoE
Cat5e/6
PoE
PoE
PoE
PoE
PoE
Remote LRP Power over UTP
Power over UTP
LRP-101UH
Long Reach PoE Injector
Long Reach Power over Ethernet
PoE Power Budget
20 watts (max.)