Datasheet

LRP-104CET
2
IP Ethernet and Power over Long Distance
The LRP-104CET provides a Long Reach PoE solution for adding PoE ports without running more cabling and achieves more flexible network applications
without requiring an external power adapter.
A normal UTP cable can only be extended up to 100 meters, but with the LRP-104CET, the distance for PoE networking can be extended up to 1,000 meters
(3,280ft.) when functioning with PLANET LRP injector or LRP switch over 75 ohm coaxial cable or up to 500 meters (1,640ft.) over twisted-pair UTP cable,
without affecting the quality of video transmission. Thus, it eliminates the need for an additional electrical outlet as its single power source can provide power to a
PoE PD at long range via the LRP-104CET.
Two Types of Power Input: Remote LRP Power through BNC/RJ45 and Local Power
In the Long Reach PoE mode, the LRP-104CET‘s PoE budget depends on the output of the Long Reach Poe Injector or Long Reach Switch, but with External
DC Power input, it is possible to increase the PoE budget up to 120W. It means the four IEEE 802.3at PDs (powered device) can be powered by the LRP-
104CET. It also features a strong dual power input system (Dual 24V~48V DC) incorporated into customer’s automation network to enhance system reliability
and uptime.
Up to 1000m
Power
Data
Coaxial Cable
Control Center
LRP-101CH
Injector
LRP-104CET
PoE IP Cam
PoE
LRP-104CET
IP Camera
PoE VoIP
PoE Wireless AP
DC
Coax.
DC
Power Line (DC)
PoE
100BASE-TX UTP with PoE
Coaxial Cable
Coax.
PoE
PoE
PoE