LRP-101U-KIT Datasheet

LRP-101U-KIT
5
LED Indicators
4 x LEDs
–
PWR
–
LRP LNK
–
PoE IN
–
LNK/ACT
4 x LEDs
–
PWR
–
LRP LNK
–
PoE-in-use
–
LNK/ACT
ESD Protection 4KV DC
EFT Protection 2KV -
Enclosure Metal case
Installation Wall mount or DIN rail with optional kit
Dimensions (W x D x H) 94 x 70 x 26 mm
Weight 193g 190g
Power Requirements
–
RJ45 PoE Input: 802.3at/af 48~56V DC
–
DC Input: 48~56V DC
Power over RJ45 Input: 44~56V DC
Standards Conformance
Standards Compliance
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3af Power over Ethernet (802.3at Type 1)
IEEE 802.3at Power over Ethernet (802.3at Type 2)
Regulation Compliance FCC Part 15 Class A, CE
Environment
Temperature
Operating: -20~70 degrees C
Storage: -40~75 degrees C
Humidity
Operating: 5~95% (non-condensing)
Storage: 5~95% (non-condensing)
Note
*1.Upload: LRP-101UE to LRP-101UH,data stream.
Download: LRP-101UH to LRP-101UE,data stream.
2.As there are various resistance values in the category of 5/5e cable, the actual data rate will vary on the
quality of the copper wire and environment factors.
** Depending on what the DC/PoE Power Input and the length of UTP cable are.
Drawing
Rear Panel
Top Panel
Bottom
Front Panel
Long Reach Power over Ethernet
Long Reach PoE Extender - UTP
LRP-101UE
LRP IN
LNK
PWR
Extender
LNK/ACTPoE In-use
10/100BASE-TX
PoE OUT
Rear Panel
Top Panel
Bottom
Front Panel
Long Reach PoE Injector - UTP
LRP-101UH
LRP OUT
LNK
PWR
Injector
Long Reach Power over Ethernet
48~56V DC IN
LNK/ACTPoE IN
10/100BASE-TX
The LRP interface is
allowed to connect to
LRP Extender only.
CAUTION