LRP-101U-KIT Datasheet

LRP-101U-KIT
4
Specications
Model
LRP-101UH LRP-101UE
Functions Long Reach PoE Injector Long Reach PoE Extender
Hardware Specications
Ethernet Interface
Copper
10/100BASE-TX RJ45
auto-negotiation/ auto-MDI/MDI-X
Power over Ethernet
Standard
IEEE 802.3at/af PoE PD
(Powered Device)
IEEE 802.3at/af PoE PSE
(Power Source Equipment)
PoE Input
Supports both mid-span and end-span PSE
Input Range: 48~56V DC
-
PoE Output - 56V DC, 600mA max.
PoE Budget - Up to 25 watts
PoE Mode - End-span, RJ45 Pin 1/2(+), 3/6(-)
Data Rate 100/100Mbps
Cabling Cat5e or above
Maximum Distance 100m
Maximum Frame Size 1522 bytes
Long Reach PoE
Interface
Connectivity
1 x RJ45 connector
Long Reach PoE over UTP PSE
1 x RJ45 connector
Long Reach PoE over UTP PD
Power Input - 37~56V DC*
Power Output 41~56V DC
Power Pin
Assignment
RJ45 Pin 1, 3, 5, 7: VCC+ RJ45 Pin 1, 3, 5, 7: VCC+
RJ45 Pin 2, 4, 6, 8: VCC- RJ45 Pin 2, 4, 6, 8: VCC-
Cabling
Cat. 3, 4, 5, 5e UTP cable (100 meters, max.)
EIA/TIA-568 100-ohm STP (100 meters, max.)
Maximum Distance
Max. 100m with PoE+ output (328ft.)
Max. 500m with PoE output (1,640ft.)
Max. 1000m without PoE output (3,280ft.)
Long Reach Ethernet
Standard
IEEE 1901
Modulation Type Wavelet-OFDM
Security 128-bit AES encryption
Frequency Band 2 ~ 28 MHz
Encryption AES 128-bit
Performance**
Distance
Data Rate*
(Upload / Download)
LRP-101UE 802.3af/at PoE Output Capability**
LRP-101UH
with 56V DC in
LRP-101UH with 30W
PoE+ in
100m 94 / 94Mbps 30W 19W
200m 82 / 82Mbps 30W 18W
300m 63 / 67Mbps 30W 17W
400m 44 / 48Mbps 22W 14W
500m 30 / 30Mbps 18W 12W
Functions
LRP Injector LRP Extender
LRP-101UH LRP-101UE
Power Input Power adapter with 48~56V DC in UTP with DC power over UTP input
Power Output UTP with DC power over UTP output RJ45 with 802.3at/af PoE output
Power over UTP
802.3af/802.3at
PoE
PoE IP Camera
Ethernet Switch
LRP-101UH
Long Reach PoE Injector
LRP-101UE
Long Reach PoE Extender
110-240V AC
AC-to-DC Adapter
60W/48~56V DC IN
CAT5e/6
CAT5e/6
PoE
Long Reach Power over Ethernet
Long Reach Power over Ethernet
Type 2: LRP-101UH with 48~56V DC power input and LRP-101UE with PoE power output
The LRP-101UH injector is powered via the DC power adapter and it transmits data and power over UTP cable to the LRP-101UE extender. An IEEE
802.3at/af compliant PoE PD will then automatically be powered by the LRP-101UE via UTP cabling.