Long Reach PoE over Coaxial / UTP Extender Kit LRP-101C-KIT and LRP-101U-KIT User’s Manual
Trademarks Copyright © PLANET Technology Corp. 2015. Contents are subject to revision without prior notice. PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners. Disclaimer PLANET Technology does not warrant that the hardware will work properly in all environments and applications, and makes no warranty and representation, either implied or expressed, with respect to the quality, performance, merchantability, or fitness for a particular purpose.
FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the Instruction manual, may cause harmful interference to radio communications.
TABLE OF CONTENTS 1. INTRODUCTION......................................................................... 6 1.1 Package Contents................................................................ 6 1.2 Introduction of Long Reach Power over Ethernet.................... 8 1.3 Product Features.................................................................. 9 1.4 Product Specifications.........................................................10 1.4.1 LRP-101C-KIT Specifications...............................
2.4 LRP-101UE.........................................................................22 2.4.1 LRP-101UE Physical Dimensions..................................22 2.4.2 LRP-101UE Front Panel and Rear Panel........................23 2.4.3 LRP-101UE LED Indicators..........................................23 3. INSTALLATION..........................................................................24 3.1 Installation Precautions of LRP-101C-KIT..............................24 3.
1. INTRODUCTION Thank you for purchasing PLANET Long Reach PoE over Coaxial / UTP Extender Kit, the LRP-101C-KIT and LRP-101U-KIT.
User’s Manual x 1 Warning Sticker x 1 For LRP-101U-KIT 1-Port 10/100TX PoE PD + 1-Port UTP Long Reach PoE Injector – LRP-101UH x 1 User’s Manual x 1 1-Port 10/100TX PoE PSE + 1-Port UTP Long Reach PoE Extender – LRP-101UE x 1 Warning Sticker x 2 Warning Sticker x 1 7
Note If any of these are missing or damaged, please contact your dealer immediately; if possible, retain the carton including the original packing material, and use them again to repack the product in case there is a need to return it to us for repair. 1.
Stable Operating Performance under Difficult Environments PLANET Long Reach PoE Extender is the perfect solution for extended distance data and power transmission for warehouses, parking lots, campuses, casinos, and many more. They can operate stably under temperature range from -20 to 70 degrees C which enables the users to conveniently apply the device in almost any location of the network. 1.
1.4 Product Specifications 1.4.1 LRP-101C-KIT Specifications Model LRP-101CH LRP-101CE Functions Long Reach PoE Injector Long Reach PoE Extender Hardware Specifications Copper Power over Ethernet Standard Ethernet Interface Long Reach PoE Interface 10 10/100BASE-TX RJ45 Auto-negotiation/ Auto-MDI/MDI-X IEEE 802.3at/af PoE PD (Powered Device) IEEE 802.
Long Reach PoE Interface Power Input ─ 37~56V DC Power Output 41~56V DC ─ Power Pin Assignment BNC center pole : DC+ BNC shield : DC - BNC center pole : DC+ BNC shield : DC - Cabling Coaxial cable: 75 ohm RG-6/U cable, less than 12Ω/1000 ft RG-59/U cable, less than 30Ω/1000 ft. Maximum Distance Max. 200m with PoE+ output (656ft.) Max. 600m with PoE output (1968ft.) Max. 1200m without PoE output (3,937ft.
LRP-101CE - 1-Port LRP Extender With power over coaxial input LRP-101CH – 1-Port LRP Injector LRP-822CS – 8-Port LRP over Coax Switch LRP-1622CS – 16-Port LRP over Coax Switch LED Indicators 4 x LEDs PWR LRP LNK PoE IN LNK/ACT 4 x LEDs PWR LRP LNK PoE-in-use LNK/ACT ESD Protection 2KV DC EFT Protection 2KV Enclosure Metal case Installation Wall mount or DIN rail with optional kit Dimensions (W x D x H) 94 x 70 x 26 mm Weight 200g Power Requirements BNC Power over Coax
Operating: 5~95% (Non-condensing) Storage: 5~95% (Non-condensing) Humidity * 1. Upload: LRP-101CE to LRP-101CH. Download: LRP-101CH to LRP101CE. 2. As there are various resistance values in the category of RG-59/U or RG-6/U cable, the actual data rate will vary on the quality of the copper wire and environment factors. ** Depending on what the DC/PoE Power Input and the length of coaxial cable are. 1.4.
Long Reach PoE Interface Connectivity 1 x RJ45 connector Long Reach PoE over UTP PSE (Power Source Equipment) 1 x RJ45 connector Long Reach PoE over UTP PD (Powered Device) Power Input ─ 37~56V DC Power Output 41~56V DC Power Pin assignment RJ45 PIN 1,3,5,7: VCC+ RJ45 PIN 1,3,5,7: VCC+ RJ45 PIN 2,4,6,8: VCC- RJ45 PIN 2,4,6,8: VCC- Cabling UTP cable: Maximum distance Max. 100m with PoE+ output (328 ft.) Max. 400m with PoE output (1,312 ft.) Max. 500m without PoE output (1,640 ft.
LED Indicators 4 x LEDs PWR LRP LNK PoE IN LNK/ACT 4 x LEDs PWR LRP LNK PoE-in-use LNK/ACT ESD Protection 2KV DC EFT Protection 2KV Enclosure Metal case Installation Wall mount or DIN rail with optional kit Dimensions (W x D x H) 94 x 70 x 26 mm Weight 193g Power Requirements Power over RJ45 Input: RJ45 PoE Input: 44~56V DC 802.3at/af 48~56V DC DC Input: 48~56V DC ─ 190g Standards Conformance Standards Compliance IEEE IEEE IEEE IEEE 802.3 10BASE-T Ethernet 802.
2. HARDWARE DESCRIPTION 2.1 LRP-101CH 2.1.1 LRP-101CH Physical Dimensions LRP-101CH dimensions (W x D x H): 94 x 70.3 x 26.2 mm Rear Panel PoE IN 48~56V DC IN LNK/ACT 10/100BASE-TX Top Panel Long Reach Power over Ethernet Bottom LRP-101CH LRP OUT Injector LNK CAUTION PWR Long Reach PoE Injector - Coax Front Panel 16 The LRP interface is allowed to connect to LRP Extender only.
2.1.2 LRP-101CH Front Panel and Rear Panel Figure 2-1 and Figure 2-2 show the front and rear panels of the LRP-101CH Long Reach PoE over Coaxial Injector. LRP-101CH LRP OUT Injector 48~56V DC IN PoE IN LNK/ACT LNK CAUTION PWR Long Reach PoE Injector - Coax The LRP interface is allowed to connect to LRP Extender only. Figure 2-1: LRP-101CH Front Panel 10/100BASE-TX Figure 2-2: LRP-101CH Rear Panel 2.1.
2.2 LRP-101CE 2.2.1 LRP-101CE Physical Dimensions LRP-101CE dimensions (W x D x H): 94 x 70.3 x 26.
2.2.2 LRP-101CE Front Panel and Rear Panel Figure 2-3 and Figure 2-4 show the front and rear panels of the LRP-101CE Long Reach PoE over Coaxial Extender. LRP-101CE LRP IN PoE In-use Extender LNK/ACT LNK PoE OUT 10/100BASE-TX PWR Long Reach PoE Extender - Coax Figure 2-3: LRP-101CE Front Panel Figure 2-4: LRP-101CE Rear Panel 2.2.3 LRP-101CE LED Indicators System LED PWR Color Function Green Lit: indicates the power is on.
2.3 LRP-101UH 2.3.1 LRP-101UH Physical Dimensions LRP-101UH dimensions (W x D x H): 94 x 70.3 x 26.2 mm Rear Panel PoE IN 48~56V DC IN LNK/ACT 10/100BASE-TX Top Panel Long Reach Power over Ethernet Bottom LRP-101UH LRP OUT LNK CAUTION Injector The LRP interface is allowed to connect to LRP Extender only.
2.3.2 LRP-101UH Front Panel and Rear Panel Figure 2-5 and Figure 2-6 show the front and rear panels of the LRP-101UH Long Reach PoE over UTP Injector. LRP-101UH LRP OUT 48~56V DC IN PoE IN LNK/ACT LNK CAUTION The LRP interface is allowed to connect to LRP Extender only. Injector 10/100BASE-TX PWR Long Reach PoE Injector - UTP Figure 2-5: LRP-101UH Front Panel Figure 2-6: LRP-101UH Rear Panel 2.3.
2.4 LRP-101UE 2.4.1 LRP-101UE Physical Dimensions LRP-101UE dimensions (W x D x H): 94 x 70.3 x 26.
2.4.2 LRP-101UE Front Panel and Rear Panel Figure 2-7 and Figure 2-8 show the front and rear panels of the LRP-101UE Long Reach PoE over UTP Extender. LRP-101UE PoE In-use LRP IN LNK/ACT LNK PoE OUT Extender 10/100BASE-TX PWR Long Reach PoE Extender - UTP Figure 2-7: LRP-101UE Front Panel Figure 2-8: LRP-101UE Rear Panel 2.4.3 LRP-101UE LED Indicators System LED PWR Color Function Green Lit: indicates the power is on.
3. INSTALLATION This section describes the functionalities of the Long Reach PoE over Coaxial / UTP Extender Kit’s components and guides you to how to install it on the desktop. Basic knowledge of networking is expected. Please read this chapter completely before continuing. 3.1 Installation Precautions of LRP-101C-KIT As the LRP-101CH is power over coaxial injector, it only can work with PLANET power over coaxial extender, the LRP-101CE.
3.3 Power options: LRP Injector There are two ways to power the LRP Injector (LRP-101CH and LRP-101UH): Powered via PoE Powered via DC adapter LRP Extender The LRP Extender must be powered by the LRP Injector or LRP Switch LRP-101CE must be powered by the LRP-101CH or LRP CS-series switch over coaxial cable LRP-101UE must be powered by the LRP-101UH or LRP US-series switch over UTP/Twisted-pair cable Caution Please don’t connect the LRP Extender to any PoE PSE (Power Sourcing Equipment). 3.
Functions LRP Injector LRP Extender LRP-101CH LRP-101CE Power Input RJ45 with 802.3at/af PoE input BNC with DC power over coaxial input Power Output BNC with DC power over coaxial output RJ45 with 802.3at/af PoE output Installation Instructions Step 1 Connect the LRP Injector (LRP-101CH) and LRP Extender (LRP-101CE) to ends of BNC terminated coaxial cable. Stick the “Warning Sticker” on the coaxial cable. Step 2 Connect Cat5/6 UTP cable to LRP-101CH and IEEE 802.
Type 2 – One LRP-101CH with 48~56V power adapter and one LRP-101CE with PoE power output The LRP Injector is powered via the external power adapter. The IEEE 802.3at/af compliant PoE PD will automatically be powered by the LRP Extender via UTP. 110-240V AC AC-to-DC Adapter 60W/48~56V DC IN LRP-101CE Long Reach PoE Extender 802.3af/802.
Note 1. Before installation, please consider the distance and watts value demand for PD devices. The LRP101C-KIT PoE powers output capacity and upload / download performance depending on the length of coaxial cable. 2. As there are various resistance values in the category of RG-59/U or RG-6/U cable, the actual data rate will vary on the quality of the copper wire and environment al factors. 3. PoE output capacity is based on different DC Power Input / PoE Input. 4.
Installation Instructions Step 1 Remove the “Danger – No Ethernet” labels stuck on the RJ45 LRP port of LRP-101UH and LRP-101UE. Step 2 Connect the LRP Injector (LRP-101UH) and LRP Extender (LRP-101UE) to ends of RJ45 terminated long UTP/twisted-pair cable. Warning 1. Please do not connect any Ethernet equipment to LRP OUT Port of the LRP-101UH; otherwise, it will damage the Ethernet equipment. 2.
Type 2 – LRP-101UH with 48~56V power adapter and LRP-101UE with PoE power output 110-240V AC AC-to-DC Adapter 60W/48~56V DC IN LRP-101UE Long Reach PoE Extender 802.3af/802.
Step 3 Connect Cat5/6 UTP cable to LRP-101UH and non-PoE switch or workstation. Step 4 Connect 48~56V DC power adapter to LRP-101UH power socket, and then the PWR LED of LRP-101UH and LRP101UE should lit up immediately. Step 5 Connect Cat5/6 UTP cable to LRP-101UE and IEEE 802.3at/af complied PoE IP camera or PoE Wireless AP. Note 1. Before installation, please consider the distance and watts value demand for PD devices.
Step 1: Screw the DIN-Rail on the Long Reach PoE over Coaxial / UTP Extender Kit. Step 2: Lightly slide the DIN-Rail into the track. 1 2 Step 3: Check whether the DIN-Rail is tightly on the track. Caution 32 You must use the screws supplied with the mounting brackets. Damage caused to the parts by using incorrect screws would invalidate your warranty.
4. TROUBLESHOOTING This chapter contains information to help you solve issues. If the Long Reach PoE over Coaxial / UTP Extender Kit is not functioning properly, make sure the Long Reach PoE over Coaxial / UTP Extender Kit is set up according to instructions in this manual. What is the maximum distance supported by LRP-101C-KIT and LRP-101U-KIT? Solution: 1. The LRP-101C-KIT supports a maximum distance of 1km. 2. The LRP-101U-KIT supports a maximum distance of 500m.
APPENDIX A: NETWORKING CONNECTION A.1 Switch’s RJ45 Pin Assignments 10/100Mbps, 10/100BASE-TX RJ45 Connector pin assignment Contact MDI Media Dependent Interface MDI-X Media Dependent Interface-Cross PoE 1 Tx + (transmit) Rx + (receive) Positive (VCC+) 2 Tx - (transmit) Rx - (receive) Positive (VCC+) 3 Rx + (receive) Tx + (transmit) Negative (VCC-) 4, 5 6 7, 8 Not used Rx - (receive) Tx - (transmit) Not used A.
There are 8 wires on a standard UTP/STP cable and each wire is colorcoded.
EC Declaration of Conformity For the following equipment: *Type of Product: 1-Port 10/100TX PoE PD + 1-Port Coax Long Reach PoE Injector 1-Port 10/100TX PoE PSE + 1-Port Coax Long Reach PoE Extender 1-Port 10/100TX PoE PD + 1-Port UTP Long Reach PoE Injector 1-Port 10/100TX PoE PSE + 1-Port UTP Long Reach PoE Extender *Model Number: LRP-101CH, LRP-101CE LRP-101UH, LRP-101UE * Produced by: Manufacturer’s Name : Manufacturer’s Address: Planet Technology Corp. 10F., No.96, Minquan Rd., Xindian Dist.
