Datasheet

LRP-101C-KIT
5
LRP Compatibility LRP-101CE - 1-Port LRP Extender
With power over coaxial input
–
LRP-101CH, 1-Port LRP Injector
–
LRP-822CS, 8-Port LRP over Coax Switch
–
LRP-1622CS, 16-Port LRP over Coax Switch
LED Indicators
4 x LEDs
–
PWR
–
LRP LNK
–
PoE IN
–
LNK/ACT
4 x LEDs
–
PWR
–
LRP LNK
–
PoE-in-use
–
LNK/ACT
ESD Protection 4KV DC
EFT Protection 2KV -
Enclosure Metal case
Installation Wall mount or DIN rail with optional kit
Dimensions (W x D x H) 94 x 70 x 26 mm
Weight 200g 375g
Power Requirements
–
RJ45 PoE Input: 802.3at/af 48~56V DC
–
DC Input: 48~56V DC
BNC Power over Coaxial Input: 44~56V DC
Standards Conformance
Standards Compliance
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3af Power over Ethernet (802.3at Type 1)
IEEE 802.3at Power over Ethernet (802.3at Type 2)
Regulation Compliance FCC Part 15 Class A, CE
Environment
Temperature
Operating: -20~70 degrees C
Storage: -40~75 degrees C
Humidity
Operating: 5~95% (non-condensing)
Storage: 5~95% (non-condensing)
Note
*1.Upload: LRP-101CE to LRP-101CH, data stream.
Download: LRP-101CH to LRP-101CE, data stream.
2. As there are various resistance values in the category of RG-59/U or RG-6/U cable, the actual data rate will
vary on the quality of the copper wire and environment factors.
** Depending on what the DC/PoE Power Input and the length of coaxial cable are.
Drawing
48~56V DC IN
LNK/ACTPoE IN
10/100BASE-TX
LRP-101CH
LNK
PWR
LRP OUT
Injector
Long Reach PoE Injector - Coax
The LRP interface is
allowed to connect to
LRP Extender only.
CAUTION
Long Reach Power over Ethernet
Rear Panel
Top Panel
Bottom
Front Panel
Rear Panel
Top Panel
Bottom
Front Panel
LNK/ACTPoE In-use
10/100BASE-TX
PoE OUT
Long Reach Power over Ethernet
Long Reach PoE Extender - Coax
LRP-101CE
LNK
PWR
LRP IN
Extender