Datasheet

LRP-101C-KIT
4
Specications
Model
LRP-101CH LRP-101CE
Functions Long Reach PoE Injector Long Reach PoE Extender
Hardware Specications
Ethernet Interface
Copper
10/100BASE-TX RJ45
auto-negotiation / auto-MDI/MDI-X
Power over Ethernet
Standard
IEEE 802.3at/af PoE PD (Powered Device) IEEE 802.3at/af PoE PSE (Power Source Equipment)
PoE Input
Supports both Mid-span and End-span PSE
Input Range: 48~56V DC
-
PoE Output - 56V DC, 600mA max.
PoE Budget - Up to 25 watts
PoE Mode - End-span, RJ45 Pin 1/2(+), 3/6(-)
Data Rate 100/100Mbps
Cabling Cat5e or above
Maximum Distance 100 meters
Maximum Frame Size 1522 bytes
Long Reach PoE
Interface
Connectivity
1 x BNC female connector
Long Reach PoE over coaxial PSE
1 x BNC female
Long Reach PoE over coaxial PD
Power Input - 37~56V DC
Power Output 41~ 56V DC -
Power Pin
Assignment
–
BNC center pole: DC+
–
BNC shield: DC -
–
BNC center pole: DC+
–
BNC shield: DC -
Cabling
Coaxial cable: 75 ohm
RG-6/U cable, less than 12Ω/1,000ft.
RG-59/U cable, less than 30Ω/1,000ft.
Maximum Distance
Max. 200m with PoE+ output (656ft.)
Max. 600m with PoE output (1,968ft.)
Max. 1200m without PoE output (3,937ft.)
Long Reach Ethernet
Standard
IEEE 1901
Modulation Type Wavelet-OFDM
Security 128-bit AES encryption
Frequency Band 2 ~ 28 MHz
Encryption AES 128-bit
Performance**
Distance
Data Rate*
(Upload / Download)
LRP-101CE 802.3af/at PoE Output Capability**
LRP-101CH
with 56V DC in
LRP-101CH with 30W
PoE+ in
200m 93 / 93Mbps 29W 16W
400m 93 / 93Mbps 22W 14W
600m 87 / 91Mbps 13W 10W
800m 75 / 83Mbps 10W 8W
1000m 55 / 73Mbps 8W 7W
Power over Coaxial
802.3af/802.3at
PoE
PoE IP Camera
Ethernet Switch
LRP-101CH
Long Reach PoE Injector
LRP-101CE
Long Reach PoE Extender
110-240V AC
AC-to-DC Adapter
60W/48~56V DC IN
PoE
CAT5e/6
CAT5e/6
Long Reach Power over Ethernet
Long Reach Power over Ethernet
Functions
LRP Injector LRP Extender
LRP-101CH LRP-101CE
Power Input Power adapter with 48~56V DC in BNC with DC power over coaxial input
Power Output BNC with DC power over coaxial output RJ45 with 802.3at/af PoE output
Type 2 – LRP-101CH with 48~56V DC power input and LRP-101CE with PoE power output
The LRP-101CH injector is powered via the DC power adapter and it transmits data and power over coaxial cable to the LRP-101CE extender. An IEEE
802.3at/af compliant PoE PD will then automatically be powered by the LRP-101CE via UTP cabling.