User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Introduction
- Chapter 3. Preparation
- Chapter 4. Web-based Management
- Appendix A: DDNS Application
Industrial LoRaWAN Gateway
LCG-300 series
- 99 -
4.9.2 5G Wi-Fi
This page allows the user to define 5G Wi-Fi as shown in Figure 4-10-3.
Figure 4-10-3: 5G WFI
Object Description
Wireless Status Allows user to enable or disable 5G Wi-Fi
Wireless Name (SSID) It is the wireless network name. The default 5G SSID is
“PLANET_5G”
Hide SSID Allows user to enable or disable SSID
Bandwidth
Select the operating channel width, “20MHz” or “40MHz” or
“80MHz”
Channel It shows the channel of the CPE. Default 5GHz is channel 36.
Encryption
Select the wireless encryption. The default is “Open”
Wi-Fi Multimedia Enable/Disable WMM (Wi-Fi Multimedia ) function