User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Introduction
- Chapter 3. Preparation
- Chapter 4. Web-based Management
- Appendix A: DDNS Application
Industrial LoRaWAN Gateway
LCG-300 series
- 71 -
4.6.1 LoRa
This page provides LoRa configuration as shown in Figure 4-6-2.
Figure 4-6-2: LoRa configuration
Object
Description
Keep Alive Period (sec)
After the configured length of time, the Gateway will issue a Pull
request to the specified IP address to confirm its connection is still
active.
Frequency Plan
Set the frequency plan to match the end node we use, so to receive
the LoRaWAN packets from the LoRaWAN sensor
EU:863~870MHz (IN865/EU868/RU864)
US: 902~928MHz (US915/AU915/KR920/AS923)