User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Introduction
- Chapter 3. Preparation
- Chapter 4. Web-based Management
- Appendix A: DDNS Application
Industrial LoRaWAN Gateway
LCG-300 series
- 62 -
4.5.3 LAN Setup
This page is used to configure the parameters for local area network which connects to the LAN port of
your LoRaWAN Gateway as shown in Figure 4-5-4. Here you may change the settings for IP address,
subnet mask, DHCP, etc.
Figure 4-5-4: LAN Setup
Object
Description
IP Address
The LAN IP address of the LoRaWAN Gateway and default is
192.168.1.1.
Net Mask Default is 255.255.255.0.