User's Manual

Industrial LoRaWAN Gateway
LCG-300 series
- 61 -
4.5.2 WAN Advanced
This page is used to configure the advanced parameters for Internet area network which connects to
the WAN port of your LoRaWAN Gateway as shown in Figure 4-5-3. Here you may change the setting
for Load Balance Weight, Detect Interval, Detect Link Up Threshold, etc.
Figure 4-5-3: LAN Setup
Object
Description
Load Balance Weight
Load Balance Weight allows you to set a relative weight (from 1 - 10)
for each WAN port.
External Connection
Detection
Enable to detect the status of WAN connection.
Detect Interval
Set the detect interval as you need.
The recommended value is 5 (default).
Detect Link Up
Threshold
Set the times for detecting link up.
The recommended value is 8 (default).
Detect Link Down
Threshold
Set the times for detecting link down.
The recommended value is 3 (default).
Custom Detect Host
The host is used to check whether the internet connection is alive or
not.