User's Manual

Industrial LoRaWAN Gateway
LCG-300 series
- 60 -
Object
Description
WAN Access Type
Please select the corresponding WAN Access Type for the Internet,
and fill out the correct parameters from your local ISP in the fields
which appear below.
Static
Select Static IP Address if all the Internet ports’ IP
information is provided to you by your ISP (Internet
Service Provider). You will need to enter the IP
address, Netmask, Gateway, and DNS Server provided
to you by your ISP.
Each IP address entered in the fields must be in the
appropriate IP form, which are four octets separated by
a dot (x.x.x.x). The LoRaWAN Gateway will not accept
the IP address if it is not in this format.
IP Address
Enter the IP address assigned by your ISP.
Netmask
Enter the Subnet Mask assigned by your ISP.
Gateway
Enter the Gateway assigned by your ISP.
DNS Server
The DNS server information will be supplied by your
ISP.
DHCP
Select DHCP Client to obtain IP Address information
automatically from your ISP.
WAN IP, whether obtained automatically or specified manually, should NOT be on
the same IP net segment as the LAN IP; otherwise, the LoRaWAN Gateway
will not
work properly. In case of emergency, press the hardware-based "Reset" button.