User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Introduction
- Chapter 3. Preparation
- Chapter 4. Web-based Management
- Appendix A: DDNS Application
Industrial LoRaWAN Gateway
LCG-300 series
- 58 -
4.5 Network
The Network function provides WAN, LAN and network configurations of the LoRaWAN Gateway as
shown in Figure 4-5-1.
Figure 4-5-1: Network Menu
Object
Description
WAN
Allows setting WAN interface.
WAN Advanced
Allows setting WAN Advanced settings.
LAN
Allows setting LAN interface.
Multi-Subnet
Allows setting Multi-Subnet1 ~ Subnet4 interface.
VLAN
Disable or enable the VLAN function.
The default configuration is disabled.
UPnP
Disable or enable the UPnP function.
The default configuration is disabled.
Routing
Allows setting Route.
RIP
Disable or enable the RIP function.
The default configuration is disabled.