User's Manual

Industrial LoRaWAN Gateway
LCG-300 series
- 54 -
4.4.10 Digital Input / Output
This page provides Digital Input / Output setting as shown in Figure 4-4-26.
Figure 4-4-26: Digital Input / Output
Object Description
• Enable
Check the Enable checkbox to enable Digital Input / output function.
Uncheck the Enable checkbox to disable Digital input / output
function.
• Condition
As Digital Input:
Allows user to select High to Low or Low to High. This means a
signal received by system is from High to Low or From Low to
High. It will trigger an action that logs a customized message or
issue the message from the switch.
As Digital Output:
Allows user to select High to Low or Low to High. This means that
when the switch’s power fails or port fails, the system will issue a
High or Low signal to an external device such as an alarm.
• Event Description
Allows user to set a customized message for Digital Input function
alarm.
• Action
As Digital Input:
Allows user to record alarm message to System log, syslog or
issues out via SNMP Trap or SMTP.
As default SNMP Trap and SMTP are disabled, please enable
them first if you want to issue alarm message via them.
As Digital Output: