User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Introduction
- Chapter 3. Preparation
- Chapter 4. Web-based Management
- Appendix A: DDNS Application
Industrial LoRaWAN Gateway
LCG-300 series
- 110 -
4.10.6 Diagnostics
The page allows you to issue ICMP PING packets to troubleshoot IP connectivity issues. After you
press “Ping”, ICMP packets are transmitted, and the sequence number and roundtrip time are
displayed upon reception of a reply. The Page refreshes automatically until responses to all packets are
received, or until a timeout occurs as shown in Figure 4-11-7
Figure 4-11-7: diagnostics page
Object
Description
Interface
Select an interface of the LoRaWAN Gateway
Target Host
The destination IP Address or domain.
Number of Packets
Set the number of packets that will be transmitted; the
maximum is 100.
Ping
The time of ping.
Be sure the target IP address is within the same network subnet of the
LoRaWAN
Gateway, or you have to set up the correct gateway IP address.