User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Introduction
- Chapter 3. Preparation
- Chapter 4. Web-based Management
- Appendix A: DDNS Application
Industrial LoRaWAN Gateway
LCG-300 series
- 106 -
4.10.2 Date and Time
This section assists you in setting the system time of the LoRaWAN Gateway. You are able to either
select to set the time and date manually or automatically obtain the GMT time from Internet as shown in
Figure 4-11-3.
Figure 4-11-3: date and time page
Object Description
Current Time
Show the current time.
User is able to set time and date manually.
Time Zone Select
Select the time zone of the country you are currently in. The LoRaWAN
Gateway will set its time based on your selection.
NTP Client Update
Once this function is enabled, LoRaWAN Gateway will automatically
update current time from NTP server.
NTP Server
User may use the default NTP sever or input NTP server manually.