User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Introduction
- Chapter 3. Preparation
- Chapter 4. Web-based Management
- Appendix A: DDNS Application
Industrial LoRaWAN Gateway
LCG-300 series
- 98 -
4.9.1 2.4G Wi-Fi
This page allows the user to define 2.4G Wi-Fi as shown in Figure 4-10-2.
Figure 4-10-2: 2.4G WFI
Object Description
Wireless Status Allows user to enable or disable 2.4G WiFi
Wireless Name (SSID) It is the wireless network name. The default 2.4G SSID is
“PLANET_2.4G”
Hide SSID Allows user to enable or disable SSID
Bandwidth
Select the operating channel width, “20MHz” or “40MHz”
Channel It shows the channel of the CPE. Default 2.4GHz is channel 6.
Encryption
Select the wireless encryption. The default is “Open”
WiFi Multimedia Enable/Disable WMM (Wi-Fi Multimedia ) function