User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Introduction
- Chapter 3. Preparation
- Chapter 4. Web-based Management
- Appendix A: DDNS Application
Industrial LoRaWAN Gateway
LCG-300 series
- 90 -
Figure 4-8-5: GRE Tunnel
Object Description
Active
Check the box to enable the function.
Tunnel Name
Enter any words for recognition.
Through
This is only available for host-to-host connections and specifies to which
interface the host is connecting.
1. LAN.
2. WAN 1.
3. WAN 2.
Peer WAN IP Address
Input the IP address of the remote host. For instance, "210.66.1.10”.
Peer Netmask
The remote subnet in CIDR notation. For instance, "210.66.1.0/24”.
Peer Tunnel IP
Address
Input the Tunnel IP address of remote host.
Local Tunnel IP
Address
Input the Tunnel IP address of remote host.
Local Netmask
Input the Tunnel IP address of the LoRaWAN Gateway