User Manual

13
3.2 Mounting Installation
This section describes how to install the Industrial Media Converter and
makes connections to it. Please read the following topics and perform
the procedures in the order being presented.
Note
In the installation steps below, this Manual uses
IGS-801 (PLANET 8-port Industrial Gigabit Switch) as
the example. However, the steps for PLANET Industrial
Switch and Industrial Media Converter are similar.
3.2.1 DIN-rail Mounting
The DIN rail is screwed on the Industrial Media Converter when is out
of factory. When replacing the wall-mount application with DIN-rail
application on Industrial Media Converter, please refer to the following
gures to screw the DIN rail on the Industrial Media Converter. To hang
the Industrial Media Converter, follow the following steps:
Step 1: Screw the DIN rail on the Industrial Media Converter.
Step 2: Lightly insert the DIN rail into the track.
1
2