Datasheet

IXT-705AT
4
Specications
Model
IXT-705AT
HardwareSpecications
Copper Interface
1 x 10000/5000/2500/1000/100 BASE-T RJ45
Auto-MDI/MDI-X, auto-negotiation
Fiber Optic Interface 1 10GBASE-SR/LR SFP+ interface.
Connector
Removable 6-pin terminal block
Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2
Alarm
Provides one relay output for power failure
Alarm relay current carry ability: 1A @ DC 24V
LED
System:
Fault Alert (Red), PWR (Green)
10000/5000/2500/1000/100 BASE-T RJ45 Interfaces:
1/10G LNK (Orange)
■ 5000/2500/100M LNK (Green)
ESD Protection 6KV DC
Enclosure IP30 type metal case
Installation DIN- rail kit and wall- mount ear
Dimensions (W x D x H) 32 x 87 x 135mm
Weight 458g 385g
Power Requirements DC 12~48V or 24V AC
ConverterSpecications
Flow Control
Back pressure for half duplex
IEEE 802.3x pause frame for full duplex
Fabric 20Gbps
Address Table 9K entries, automatic source address learning and aging
Jumbo Frame 16K
Network Cables
10G/5G/2.5G/1G/100M BASE-T:
10G – Cat 6A/7
5G – Cat 6/6A/7
1G/2.5G – Cat 5e/6/6A/7
100M – Cat 5/5e/6/6A/7
Cat 5/5e/6/6A/7 UTP cable (100 meters, max.)
EIA/TIA-568 100-ohm STP (100 meters, max.)
10GBASE-LR/SR/BX :
50/125μmor62.5/125μmmulti-modeberopticcable,upto300m
9/125μmsingle-modeberopticcable,upto60km
Standards Conformance
Standards Compliance
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
IEEE 802.3bz 2.5G/5GBASE-T
IEEE 802.3an 10GBASE-T
IEEE 802.3ae 10Gbps Ethernet
IEEE802.3xfull-duplexowcontrol
Regulatory Compliance FCC Part 15 Class A, CE
Stability Testing
IEC60068-2-32 (Free fall)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)
Environment
Temperature
Operating: -40~75 degrees C
Storage: -40~75 degrees C
Humidity
Operating: 5~95% (non-condensing)
Storage: 5~95% (non-condensing)
Ordering Information
IXT-705AT
Industrial 10G/5G/2.5G/1G/100M Copper to 10GBASE-X SFP+ Media Converter