User's Manual

Industrial VPN Security Gateway
IVR-100_IVR-300 Series
- 81 -
4.5.8 Routing
Please refer to the following sections for the details as shown below.
Figure: Routing table
Figure: Routing setup
Routing tables contain a list of IP addresses. Each IP address identifies a remote VPN Security Gateway (or
other network gateway) that the local VPN Security Gateway is configured to recognize. For each IP address,
the routing table additionally stores a network mask and other data that specifies the destination IP address
ranges that remote device will accept.
Object
Description
Type
There are two types: Host and Net.
When the Net type is selected, user does not need to input the
Gateway.
Destination
The network or host IP address desired to access.
Net Mask
The subnet mask of destination IP.