User's Manual

Industrial VPN Security Gateway
IVR-100_IVR-300 Series
- 78 -
4.5.3 WAN Advanced
This page is used to configure the advanced parameters for Internet area network which connects to the WAN
port of your VPN Security Gateway as shown below. Here you may change the setting for Load Balance
Weight, Detect Interval, Detect Linkup Threshold, etc.
Figure: LAN Setup
Object
Description
Load Balance Weight
Load Balance Weight allows you to set a relative weight (from 1 - 10)
for each WAN port.
External Connection
Detection
Enable to detect the status of WAN connection.
Detect Interval
Set the detect interval as you need.
The recommended value is 5 (default).
Detect Link Up
Threshold
Set the times for detecting link up.
The recommended value is 8 (default).
Detect Link Down
Threshold
Set the times for detecting link down.
The recommended value is 3 (default).
Custom Detect Host
The host is used to check whether the internet connection is alive or
not.