User's Manual

Industrial VPN Security Gateway
IVR-100_IVR-300 Series
- 75 -
The default configuration is disabled.
IGMP
Disable or enable the IGMP function.
The default configuration is disabled.
IPv6
Allows setting IPv6 WAN interface.
DHCP
Allows setting DHCP Server.
DDNS
Allows setting DDNS and PLANET DDNS.
MAC Address
Clone
Allows setting WAN MAC Address Clone.
4.5.1 Priority
This page provides SD WAN priority setting as shown below.
Figure: SD WAN Configuration
Object Description
Active
 Enable / Disable the Active
Group Name
 Setting the Group Name.
Path
 Setting the SD-WAN To / To SD-WAN
Service Port or Group
 Setting the Service Port or Group Border Gateway Protocol
4.5.2 WAN
This page is used to configure the parameters for Internet network which connects to the WAN port of the
VPN Security Gateway as shown below. Here you may select the access method by clicking the item value of
WAN access type.