User's Manual

Industrial VPN Security Gateway
IVR-100_IVR-300 Series
- 51 -
Mode 1 -- Static IP
Select Static IP Address if all the Internet port’s IP information is provided to you by your ISP. You will need to
enter the IP Address, Netmask, Default Gateway and DNS Server provided to you by your ISP. Each IP
address entered in the fields must be in the appropriate IP form, which are four octets separated by a dot
(x.x.x.x). The VPN Security Gateway will not accept the IP address if it is not in this format. The setup is
shown below.
Figure: WAN Interface Setup – Static IP Setup
Object
Description
IP Address
Enter the IP address assigned by your ISP.
Netmask
Enter the Netmask assigned by your I SP.
Default Gateway
Enter the Gateway assigned by your ISP.
DNS Server
The DNS server information will be supplied by your ISP.
Next
Press this button for the next step.
Previous
Press this button for the previous step.
Cancel
Press this button to undo any changes made locally and revert to
previously saved values.
Mode 2 -- DHCP Client
Select DHCP Client to obtain IP Address information automatically from your ISP. The setup is shown below.