User's Manual

Industrial VPN Security Gateway
IVR-100_IVR-300 Series
- 28 -
2.2 Hardware Installation
This section describes how to install the Industrial Gateway. There are three methods to install the Industrial
Gateway -- DIN-rail mounting, wall mounting and side wall mounting. Basic knowledge of networking is
assumed.
Please read the following sections and perform the procedures in the order being presented.
(The device shown on this chapter is just a representation of the said device.)
2.2.1 DIN-rail Mounting
Step 1: Lightly slide the DIN-rail into the track.
Step 2: Check whether the DIN-rail is tightly on the track.