User's Manual

Industrial VPN Security Gateway
IVR-100_IVR-300 Series
- 23 -
1. Insert positive and negative DC power wires into contacts 1 and 2 for POWER 1, or 5 and 6 for POWER
2.v
To avoid damage, please use the Industrial Gateway under its specification.
2. Tighten the wire-clamp screws for preventing the wires from loosening.
1
2
3
4
5
6
Power 1
Alarm
Power 2
+
-
+
-
The wire gauge for the terminal block should be in the range from 12 to 24 AWG.
PWR1 and PWR2 must provide the same DC voltage while operating with
dual power input.