User's Manual

Table Of Contents

Industrial VPN Security Gateway

IVR-100_IVR-300 Series

- 2 -

The products and programs described in this User’s Manual are licensed products of PLANET Technology,

This User’s Manual contains proprietary information protected by copyright, and this User’s Manual and all

accompanying hardware, software, and documentation are copyrighted.

No part of this User’s Manual may be copied, photocopied, reproduced, translated, or reduced to any

electronic medium or machine-readable form by any means, electronic or mechanical including photocopying,

recording, or information storage and retrieval systems, for any purpose other than the purchaser's personal

use, and without the prior express written permission of PLANET Technology.

Disclaimer

PLANET Technology does not warrant that the hardware will work properly in all environments and

applications, and makes no warranty and representation, either implied or expressed, with respect to the

quality, performance, merchantability, or fitness for a particular purpose.

PLANET has made every effort to ensure that this User’s Manual is accurate; PLANET disclaims liability for

any inaccuracies or omissions that may have occurred. Information in this User’s Manual is subject to change

without notice and does not represent a commitment on the part of PLANET. PLANET assumes no

responsibility for any inaccuracies that may be contained in this User’s Manual. PLANET makes no

commitment to update or keep current the information in this User’s Manual, and reserves the right to make

improvements and/or changes to this User’s Manual at any time without notice.

If you find information in this manual that is incorrect, misleading, or incomplete, we would appreciate your

comments and suggestions.

FCC Compliance Statement

This Equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to

Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio

communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.