Datasheet

ISW-808PT-M12A
4
Model
ISW-808PT-M12A
HardwareSpecications
Copper Ports
8 x M12, 4-pin D-coded female connector
10/100BASE-TX auto-MDI/MDI-X
IEEE 802.3at PoE+ Ports 8, port 1 to port 8
Power Connector
1 x M23, 5-pin A-coded male connector
Enclosure IP50 metal case
Dimensions (W x D x H) 132 x 75 x 160mm
Weight 952g
Installation Wall-mount and DIN-rail kit
Power requirements Dual 12~56V DC
Power Consumption Max. 197.3 watts/673.2BTU
ESD Protection 6KV DC
Surge Protection 6KV DC
SwitchSpecications
Switch Processing Scheme Store-and-Forward
Address Table 2K entries
Flow Control
Back pressure for half duplex
IEEE 802.3x pause frame for full duplex
Switch Fabric 1.6Gbps
Throughput (packet per second) 1.19Mpps
Maximum Transmit Unit 1536 bytes
Network Cables
10BASE-T: 2-pair UTP Cat.3,4,5 up to 100m (328ft)
100BASE-TX: 2-pair UTP Cat.5, 5e, 6 up to 100m (328ft)
EIA/TIA-568 100-ohm STP (100m, max.)
Power over Ethernet
PoE Standard IEEE 802.3at Power over Ethernet Plus / PSE
PoE Power Supply Type End-span
PoE Power Output 54V DC per port with maximum of 36 watts
Power Pin Assignment 1/2(+), 3/6(-)
PoE Budget
180 watts@48-56V DC input
120 watts@24~48V DC input
60 watts@12~23V DC input
Standards Conformance
Regulatory Compliance
FCC Part 15 Class A
CE
Standards Compliance
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet plus
Stability Testing
IEC60068-2-32 (free fall)
IEC60068-2-27 (shock)
IEC60068-2-6 (vibration)
Environments
Operating
Temperature: -40 ~ 75 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Storage
Temperature: -40 ~ 80 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Specications