Datasheet

ManualsBrandsPLANET Technology ManualsDIN-rail Unmanaged Fast Ethernet PoE SwitchIndustrial IP67 8-Port 10/100TX M12 802.3at PoE+ Switch

ISW-808PT-M12

Industrial IP67 8-Port 10/100TX M12 802.3at PoE+ Switch

(-40~75 degrees C)

Physical Port

• 8-port 10/100BASE-TX with waterproof/dustproof M12

connectors and IEEE 802.3at PoE+ injector function

Power over Ethernet

• Its end-span PSE complies with IEEE 802.3at Power over

Ethernet Plus.

• Backward compatible with IEEE 802.3af Power over

Ethernet

• Up to 8 ports of IEEE 802.3af/802.3at devices powered

• 180-watt PoE budget

• Supports PoE power up to 36 watts for each PoE port

• Auto detects powered device (PD)

• Circuit protection prevents power interference between

ports

• Remote power feeding up to 100 meters

Layer 2 Features

• Supports auto-negotiation and 10/100Mbps half/full duplex

mode

• High-performance Store and Forward architecture; runt/

CRClteringeliminateserroneouspacketstooptimizethe

network bandwidth

• Prevents packet loss with back pressure (half-duplex) and

IEEE802.3xpauseframeowcontrol(full-duplex)

• Backplane (switching fabric): 1.6Gbps

• Integrated address look-up engine, supporting 2K absolute

MAC addresses

• Automatic address learning and address aging

• CSMA/CD Protocol

Industrial Case and Installation

• IP67 aluminum case

• Waterproof/dustproof and fanless designs

• DIN-rail and wall-mount installation

• Redundant power design

– 12 to 56V DC, redundant power with reverse polarity

protection

Reliable Data and Power over Ethernet

PLANET ISW-808PT-M12 is an industrial-grade robust and vibration-proof PoE+

switch for a wide range of applications in factories or moving trains as it guarantees

a reliable performance under vibration and shock. It features eight 10/100BASE-

TX auto-negotiation waterproof/dustproof M12 connectors with IEEE 802.3at

PoE+ injector function; each PoE+ port provides 36 watts of PoE output. The

M12 connector provides tight and strong connection, and ensures stable Ethernet

operating performance withstanding humidity, dirt, dust, shock, vibrations, heat and

cold. The compact, IP67-rated aluminum case of the ISW-808PT-M12 allows either

DIN-railorwallmountingforefcientuseofcabinetspace.

Environmentally-hardened Design

Being able to operate under the temperature range from -40 to 75 degrees

C, the ISW-808PT-M12, equipped with a tough IP67-rated industrial aluminum

case, provides a high level of immunity against electromagnetic interference and

heavy electrical surges which are usually found on plant floors or in curb-side

traffic control cabinets. It ensures the highest level of reliability for mission-critical

applicationsinanydifcultenvironment.

Summary of content (5 pages)

PAGE 1
ISW-808PT-M12 Industrial IP67 8-Port 10/100TX M12 802.3at PoE+ Switch (-40~75 degrees C) Physical Port • 8-port 10/100BASE-TX with waterproof/dustproof M12 connectors and IEEE 802.3at PoE+ injector function Power over Ethernet • Its end-span PSE complies with IEEE 802.3at Power over Ethernet Plus. • Backward compatible with IEEE 802.
PAGE 2
ISW-808PT-M12 Convenient and Reliable Power System To facilitate the 802.3at PoE usage with commonly-used 12~54V DC power input for transportation and industrial-level applications, the ISW-808PT-M12 adopts the –– Active-active redundant power failure protection –– Backup of catastrophic power failure on one supply –– Fault tolerance and resilience 12~54V DC to 54V power boost technology to solve power source issue but does • Supports 6KV DC Ethernet ESD protection not require special power supplies.
PAGE 3
ISW-808PT-M12 Railway Transmission System Passenger Information System Entertainment System PoE IP Camera Next Stop Laptop PoE PoE N N Content Server AP ISW-808PT-M12 PoE ISW-808PT-M12 Control Center ISW-808PT-M12 ISW-808PT-M12 PoE IP Camera PoE IP Camera PoE PoE Industrial Backbone Switch PC VoIP PC AP 100BASE-TX UTP 100BASE-TX UTP with PoE PoE PoE Public Construction for Data Collection and Forwarding Providing up to 8 PoE+, in-line power interfaces, the ISW-808PT-M12 can easily bu
PAGE 4
ISW-808PT-M12 Drawing 124 1 53.1 5 LNK/ACT PoE-in-Use 2 6 LNK/ACT PoE-in-Use 204 19.6 4 48.8 7 LNK/ACT PoE-in-Use 163 3 8 LNK/ACT PoE-in-Use 66 DC Input: 12-56V , 6A max. V1 V1 V2 TX RX V2 RX TX GND PoE Usage Fault 180W PWR 2 120W PWR 1 60W ISW-808PT-M12 6 PoE+ M12 76 Unit: mm Specifications Model ISW-808PT-M12 Hardware Specifications 8 x M12, 4-pin D-coded female connector 10/100BASE-TX auto-MDI/MDI-X Copper Ports LNK/ACT PoE-in-Use IEEE 802.
PAGE 5
ISW-808PT-M12 Switch Fabric 1.6Gbps Throughput (packet per second) 1.19Mpps Maximum Transmit Unit 1536 bytes 10BASE-T: 2-pair UTP Cat.3,4,5 up to 100m (328ft) Network Cables 100BASE-TX: 2-pair UTP Cat.5, 5e, 6 up to 100m (328ft) EIA/TIA-568 100-ohm STP (100m, max.) Power over Ethernet PoE Standard IEEE 802.