Datasheet

ISW-801T
3
Specications
Model
ISW-801T
Hardware Specications
10/100BASE-TX Auto MDI/MDIX Ports 8
LED Indicators
3 x LED for System and Power
–
Green: DC Power 1
–
Green: DC Power 2
–
Green: Power Fault
1x LED for each Copper Port
–
Green: 10/100 LNK/ACT
Enclosure IP30-rated metal case
Dimensions (W x D x H) 135 x 87 x 32 mm
Weight 428g
ESD Protection 6KV DC
EFT Protection 6KV DC
Power Requirements 12~48V DC, redundant power with polarity reverse protection function, 24V AC power support
Power Consumption / Dissipation 2.1 wat ts/ 7.1BTU
Installation DIN rail kit and wall-mount ear
Alarm
Provides one relay output for power failure
Alarm relay current carry ability: 3A @ DC 30V
Connector
Removable 6-pin terminal block
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
Switch Specications
Switch Processing Scheme Store-and-Forward
Address Table 1K
Buffer Memory Embedded 448K bits packet buffer
Flow Control
Back pressure for half duplex,
IEEE 802.3x pause frame for full duplex
Switch Fabric 1.6Gbps
Throughput (packet per second) 1.19 Mpps
Network Cables
10BASE-T: 2-pair UTP Cat. 3, 4, 5, up to 100 meters
100BASE-TX: 2-pair UTP Cat. 5, 5e up to 100 meters
Standards Conformance
Standards Compliance
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3x Full Duplex Flow Control
IEEE 802.3az Energy Efcient Ethernet
Temperature
Operating: -40~75 degrees C
Storage: -40~75 degrees C
Humidity Operating: 5% to 95%, Storage: 5% to 95% (non-condensing)
Regulatory Compliance FCC Part 15 Class A, CE
Stability Testing
IEC60068-2-32 (free fall)
IEC60068-2-27 (shock-proof)
IEC60068-2-6 (vibration-proof)
ISW-801T 8-Port 10/100TX Industrial Fast Ethernet Switch (-40~75 degrees C operating temperature)
Ordering Information