Datasheet

ISW-621TF
2
Applications
Industrial Switch for High Performance Data Collection and Forwarding
The ISW-621TF is equipped with four 10/100Mbps ports offering auto MDI / MDIX feature, and two 100Base-FX SFP slots providing 1.2Gps non-blocking
switch fabric and the 2K MAC address table so that they can perform wire-speed packets transfer without risk of packet loss. The ISW-621TF, which come in
the slim type IP30 metal case, is ideal for the most heavy industrial demanding environments.
Steel Factory
IP Camera
IP Camera
Fiber
Switch
IP Camera IP Camera
IP Camera
IP Camera
Weather Station
Winter season of Country
ISW-621TF
ISW-621TF
ISW-621TF
ISW-621TF
ISW-621TF
ISW-621TF
2km (Multi-mode) 2km (Multi-mode)
2km
(Multi-mode)
20km
(Single mode)
60km
(Single mode)
20km
(Single mode)
Desert
Data Center
100Base-FX Fiber-optic
100
100Base-TX UTP
100
100
100
100
100
100
Specications
Model
ISW-621TF
Hardware Specications
Copper Interface
Ports 4 x 10/100Base-TX, auto negotiation, auto-MDI/MDI-X
Cable
10Base-T: 2-pair UTP Cat. 3, 4, 5 cable (100 meters, max.)
100Base-TX: 2-pair UTP Cat. 5, 5e, 6 cable (100 meters, max.)
Optical Interface
Port / Type 2 x 100Base-FX / LC interfaces
Cable
Multi-mode: 50/125μm / 62.5/125μm ber
Single-mode: 9/125μm ber
Dimensions (W x D x H) Cable
Weight 442g
Power Requirements
12~48V DC,
Redundant power with polarity reverse protection
Power Consumption / Dissipation Max. 16 watts / 54 BTU
Installation DIN rail kit / wall mount ear
Alarm
Provides one relay output for power failure
Alarm relay current carry ability: 1A @ DC 24V
Switch Specications
Switch Processing Scheme
Store-and-Forward
Address Table 2K entries
Buffer 1Mbit
Flow Control
Back pressure for half duplex
IEEE 802.3x pause frame for full duplex
Switch Fabric 1.2Gbps
Throughput
(Packet Per Second)
0.89Mpps @ 64Bytes