Datasheet

ISW-621
ISW-621S15
New slim type with more practicability and convenience
PLANET releases the advanced industrial hardened Ethernet Switch with
new slim type, IP-30 metal case: ISW-621 / ISW-621S15. Each of them
equips with 4 10/100Base-TX Auto-negotiation ports. The ISW-621 has
2 100Base-FX multi-mode SC interfaces for transmission distance up to
2km, and the ISW-621S15 has 2 100Base-FX single-mode SC interfaces
for transmission distance up to 15km, both of them operate reliably in
Heavy Industrial demanding environments. Meanwhile, the compact, IP-30
standard metal case allows either DIN rail or wall mounting for efficient
use of cabinet space.
Stable operate performance under difficult environments
The ISW-621 / ISW-621S15 provide a high level of immunity against
electromagnetic interference and heavy electrical surges which are usually
found on plant floors or in curb side traffic control cabinets. Being able to
operate under the temperature range from -10 to 60 Degree C coupled
with hazardous location certification (Class 1 Division 2), the ISW-621
/ ISW-621S15 can be placed in almost any difficult environment. The
ISW-621 / ISW-621S15 also possess an integrated power supply source
with wide range of voltages (12 to 48V DC) for worldwide high availability
applications requiring dual or backup power inputs.
Robust Switch performance
The ISW-621 / ISW-621S15 each provides 4 10/100Base-TX Ethernet
ports and 2 100Base-FX optic-fiber SC interfaces, and boasts a high
performance switch architecture that is capable of providing non-blocking
switch fabric and wire-speed throughput as high as 1.2Gbps. With 2K
MAC Address table, they offer wire-speed packets transfer performance
without risk of packet loss. The Flow Control function allows the ISW-621
/ ISW-621S15 for fast and reliable data transfer.
Data Sheet
1
Key Features
PHYSICAL PORT
• 4-Port 10/100Base-TX RJ-45 with auto MDI/MDI-X function
• 2-Port 100Base-FX interfaces for up to 2km (Multi-mode fiber
50/125µm) on ISW-621
• 2-Port 100Base-FX interfaces for up to 15km (Single-mode fiber
9/125µm) on ISW-621S15
LAYER 2 FEATURES
• Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX,
100Base-FX Ethernet standard
• Supports Auto-negotiation and 10/100Mbps half / full duplex
mode for each copper port
• High performance Store and Forward architecture, broadcast
storm control, runt/CRC filtering eliminates erroneous packets
to optimize the network bandwidth
• Prevents packet loss with back pressure (Half-Duplex) and IEEE
802.3x PAUSE frame flow control (Full-Duplex)
• Backplane (Switching Fabric): 1.2Gbps
• Integrated address look-up engine, support 2K absolute MAC
addresses
• 1 Mbit on-chip frame buffer
• Automatic address learning and address aging
• CSMA/CD Protocol
INDUSTRIAL CASE / INSTALLATION
• IP-30 Metal case / Protection
• DIN Rail and Wall Mount Design
• 12 to 48V DC, redundant power with polarity reverse protect
function and connective removable terminal block for master
and slave power
• Supports EFT protection 6000 VDC for power line
• Supports 6000 VDC Ethernet ESD protection
• -10 to 60 Degree C operation temperature
4-Port 10/100Base-TX + 2-Port 100Base-FX Industrial Fast
Ethernet Switch
All of the RJ-45 copper interfaces in the ISW-621 / ISW-621S15 support
10/100Mbps Auto-Negotiation for optimal speed detection through RJ-45
Category 3, 4 or 5 cables. The standard Auto-MDI/MDI-X support can detect
the type of connection to any Ethernet device without requiring special
straight or crossover cables.