ISW-514PTF(V3) Datasheet

ManualsBrandsPLANET Technology ManualsPoE switchesIP30 Industrial Ethernet Switch 4-Port 10/100Mbps with PoE + 1-Port 100Base-FX (MM, SC, 2km) (-40 ~ 75C)

ISW-514PTF

Cost-effective Full PoE+ Power Solution Ideal for Hardened

Environment

Featuring Plug and Play designed to be installed in heavy industrial demanding

environments, the ISW-514PTF is a PLANET Industrial-grade, DIN-rail type

Unmanaged Fast Ethernet PoE+ Switch with 4 10/100BASE-TX ports featuring

IEEE 802.3at PoE+, and 1 100BASE-FX ber optic interface for video uplink.

The ISW-514PTF is designed with redundant power system and is able to

operate reliably, stably and quietly in any hardened environment without affecting

its performance. It comes with a total power budget of up to 120 watts for different

kinds of PoE applications and operating temperature ranging from -40 to 75

degrees C in a rugged IP40 metal housing.

Extension of Ethernet Data Transmission Distance

The ISW-514PTF has a built-in solid DIP switch providing “Standard”, "VLAN"

and “Extend” operation modes. By default, the ISW-514PTF operates as a normal

IEEE 802.3af/at PoE+ Switch in the “Standard” operation mode.

Industrial 4-port 10/100TX 802.3at PoE+ plus 1-Port 100FX

Ethernet Switch

Interface

• 4 10/100BASE-TX Fast Ethernet RJ45 copper ports with

IEEE 802.3at PoE+ Injector (Port-1 to Port-4)

• 1 100BASE-FX SFP interface

• One terminal block for master and slave power input

(Power Range: 12 ~ 48V DC redundant power)

• Hardware-based DIP switch for Standard, VLAN and

Extend mode selection; the Extend mode features 25-watt

PoE transmission distance of 250m at speed of 10Mbps

(Only for Port-1 to Port-4)

Power over Ethernet

• Complies with IEEE 802.3at Power over Ethernet Plus,

end-span PSE

• Backward compatible with IEEE 802.3af Power over

Ethernet

• Up to 4 ports of IEEE 802.3af/at devices powered

• Up to 120-watt PoE budget

• Supports PoE power up to 36 watts for each PoE port

• Each port supports 54V DC power to PoE powered device

• Auto detects powered device (PD)

• Circuit protection prevents power interference between

ports

• Remote power feeding up to 100m in standard mode with

250m in extend mode

Switching

• Hardware-based 10/100Mbps (half/full duplex), auto-

negotiation and auto MDI/MDI-X

• FeaturesStore-and-Forwardmodewithwire-speedltering

and forwarding rates

• IEEE802.3xowcontrolforfullduplexoperationandback

pressure for half duplex operation

• 2K MAC address table size

• 10K jumbo frame

• IEEE 802.1Q VLAN transparency

• Automatic address learning and address aging

• Supports CSMA/CD protocol

Standard Mode (default)

PoE

100BASE-TX UTP with PoE

PoE IP Camera

PoE

100 meters (328 feet)

ISW-504PT/ISW-514PTF

Summary of content (6 pages)

PAGE 1
ISW-514PTF Industrial 4-port 10/100TX 802.3at PoE+ plus 1-Port 100FX Ethernet Switch Interface • 4 10/100BASE-TX Fast Ethernet RJ45 copper ports with IEEE 802.
PAGE 2
ISW-514PTF The "VLAN" operation mode features port-based VLAN function that helps to Industrial Case and Installation prevent the IP camera’s multicast or broadcast storm from influencing each other.
PAGE 3
ISW-514PTF Fiber Optic Link Capability for Flexible Distance Extension The ISW-514PTF is equipped with one 100BASE-FX port, meaning the administrator now can flexibly choose the suitable SFP transceiver according to not only the transmission distance but also the transmission speed required. The distance can be extended from 2 kilometers (multi-mode fiber) to 20/40/60 kilometers (single-mode fiber or WDM fiber).
PAGE 4
ISW-514PTF Applications Industrial-grade PoE+ Switch for Building Automation and Security Suitable for buildings where security is strictly enforced, the ISW-514PTF, with four Fast Ethernet 802.3at PoE+, in-line power interfaces, can easily build a power that can centrally control an IP phone system, IP surveillance system, and wireless AP group in the harsh Industrial environment.
PAGE 5
ISW-514PTF Specifications Product ISW-514PTF Hardware Specifications Fast Ethernet Copper Ports Four 10/100BASE-TX RJ45 auto-MDI/MDI-X ports PoE Injector Port Four ports with 802.3af/at PoE+ injector function (Port-1 to Port-4) SFP Port One port 100BASE-FX SFP port Switch Architecture Store-and-Forward Switch Fabric 1Gbps/non-blocking Switch Throughput@64 bytes 0.74Mpps @64 bytes MAC Address Table 2K entries Flow Control IEEE 802.
PAGE 6
ISW-514PTF Standards Compliance IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3x Flow Control and Back Pressure IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus Environment Operating Temperature -40 ~ 75 degrees C Storage Temperature -40 ~ 85 degrees C Humidity 5 ~ 95% (non-condensing) Standard Accessories Package Contents ISW-514PTF User's manual Wall-mount kit Dust cap Ordering Information ISW-514PTF Industrial 4-Port 10/100TX 802.