Datasheet

ManualsBrandsPLANET Technology ManualsDIN-rail Unmanaged Ethernet Switches4-Port 10/100Base-TX + 1-Port 100Base-FX Industrial Ethernet Switch with Wide Operating Temperature (-40~75 degrees C)

Data Sheet

ISW-511T / ISW-511TS15

4-Port 10/100Base-TX + 1-Port 100Base-FX Industrial Ethernet Switch

with Wide Operating Temperature (-40~75 degrees C)

Highly Convenient and Feasible Industrial Robust Switch

PLANET has upgraded two models named ISW-511T and ISW-511TS15 for use in

environments with wide operating temperature. The capital ‘T’ (ISW-511T and ISW-

511TS15) shown in the model names means that they can support and operate under

WIDE-TEMPERATURE environment ranging from -40 up to 75 degrees C. As we know

the temperature in many places and countries of the world are lower than -10 degrees

C, these two new models, ISW-511T and ISW-511TS15, will be the right products

for Transportation, Manufacturing, Security and Surveillance network deployments in

those harsh environments. The ISW-511T / ISW-511TS15 also provides a high level of

immunity against electromagnetic interference and heavy electrical surges which are

usually found on plant oors or in curb side trafc control cabinets.

Flexibly Extendable Distance

They (the ISW-511T and ISW-511TS15) each include four 10/100Base-TX auto-

negotiation ports and one 100Base-FX port. The ISW-511T is equipped with 100Base-

FX multi-mode SC interfaces for transmission distance up to 2km while the ISW-

511TS15 is equipped with 100Base-FX single-mode SC interfaces for transmission

distance up to 15km. Users can choose either model suitable for network deployment,

either for a long-distance (ISW-511TS15) or short-distance (ISW-511T) transmission.

Easy Installation and Wide Range of Power Usages

The ISW-511T and ISW-511TS15 are designed with a compact case that allows either

DIN rail or panel mounting for the efficient usage of cabinet space. It provides an

integrated power supply with a wide range of voltages for worldwide operation. It also

offers dual-redundant, reversible polarity 12V DC to 48V DC power supply inputs for

high availability applications requiring dual or backup power inputs.

Physical Port

• 4-port 10/100Base-TX RJ-45 with auto MDI / MDI-X function

for ISW-511T series

• 1-port 100Base-FX interface on ISW-511T for up to 2km

(multi-mode ber 62.5/125μm, 50/125µm) transmission

distance

• 1-port 100Base-FX interface on ISW-511TS15 for up to 15km

(single-mode ber 9/125µm) transmission distance

Layer 2 Features

• Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX,

100Base-FX Ethernet standard

• Supports auto negotiation and 10/100Mbps half / full duplex

mode for each copper port

• High performance Store and Forward architecture

• Prevents packet loss with back pressure (half-duplex) and

IEEE 802.3x pause frame ow control (full-duplex)

• Backplane (Switching Fabric): 1Gbps

• Integrated address look-up engine, supporting 2K absolute

MAC addresses

• 1Mbit on-chip frame buffer

• Automatic address learning and address aging

• CSMA / CD Protocol

Industrial Case / Installation

• IP30 metal case / protection

• DIN rail and wall mount design

• 12 to 48V DC, redundant power with polarity reverse

protection and connective removable terminal block for master

and slave power

• Supports EFT protection 6KV DC for power line

• Supports 6KV DC Ethernet ESD protection

• -40 to 75 degrees C wide operating temperature

Summary of content (3 pages)

PAGE 1
ISW-511T / ISW-511TS15 4-Port 10/100Base-TX + 1-Port 100Base-FX Industrial Ethernet Switch with Wide Operating Temperature (-40~75 degrees C) Physical Port • 4-port 10/100Base-TX RJ-45 with auto MDI / MDI-X function for ISW-511T series • 1-port 100Base-FX interface on ISW-511T for up to 2km (multi-mode fiber 62.
PAGE 2
ISW-511T / ISW-511TS15 Applications Industrial Switch for High Performance Data Collection and Forwarding The ISW-511T and ISW-511TS15 are equipped with four 10/100Mbps ports offering auto MDI / MDIX feature and one 100Base-FX optic-fiber SC interface providing 1Gps non-blocking switch fabric and the 2K MAC address table so that they can perform wire-speed packets transfer without risk of packet loss.
PAGE 3
ISW-511T / ISW-511TS15 Power Consumption / Dissipation 13.7 watts / 46 BTU Installation DIN rail kit and wall mount ear Alarm Provides one relay output for power failure Alarm relay current carry ability: 1A @ DC 24V Switch Specifications Switch Processing Scheme Address Table Buffer Store-and-Forward 2K entries 1Mbit Back pressure for half duplex, IEEE 802.3x pause frame for full duplex Flow Control Switch Fabric 1Gbps Throughput (Packet Per Second) 0.