(V3) Datasheet
ISW-504PT
5
Specications
Product
ISW-504PT
HardwareSpecications
Fast Ethernet Copper Ports
Five 10/100BASE-TX RJ45 auto-MDI/MDI-X ports (Port-1 to Port-5)
PoE Injector Port Four ports with 802.3af/at PoE+ injector function (Port-1 to Port-4)
Switch Architecture Store-and-Forward
Switch Fabric 1Gbps/non-blocking
Switch Throughput@64 bytes 0.74Mpps @64 bytes
MAC Address Table 1K entries
Flow Control
IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
Jumbo Frame 1536 Bbytes
DIP Switch (Port-1 to Port-4)
Standard mode: 30-watt PoE transmission distance of 100m at speed of 10/100Mbps
VLAN mode: "Port-based VLAN Protection" where ports can be isolated from each other via one DIP switch.
Only Port-5 can visit other ports.
Extend mode: 25-watt PoE transmission distance of 250m at speed of 10Mbps
LED Indicators
3 x LED for System and Power:
■Green:DCPower1
■Green:DCPower2
■Red:PowerFaultAlarm
2 x LED for PoE Copper Port (Port-1~Port-4):
■Green:LNK/ACT(10/100Mbps)
■Orange:PoE-in-Use
1 x LED for 10/100TX Copper Port (Port-5):
■Green:LNK/ACT
4 x LED for PoE Usage
■Orange
Connector
Removable 6-pin terminal block
■Pin1/2forPower1
■Pin3/4forpowerfaultalarm
■Pin5/6forPower2
Alarm
One relay output for power failure.
Alarm relay current carry ability: 1A @ 24V AC
Power Requirements 12~48V DC, 7A (max.)
Power Consumption/ Dissipation
3.7 watts, 12.6 BTU (Standby without PoE function) at DC 12V power input
70 watts, 238.8 BTU (Full loading with PoE function) at DC 12V power input
4.6 watts, 15.7 BTU (Standby without PoE function) at DC 24V power input
105.1 watts, 358.6 BTU (Full loading with PoE function) at DC 24V power input
4.8 watts, 16.4 BTU (Standby without PoE function) at DC 48V power input
136.8 watts, 466.8 BTU (Full loading with PoE function) at DC 48V power input
Dimensions (W x D x H) 50 x 85.1 x 135 mm
Weight 596g
ESD Protection 5KV DC
Enclosure IP40 metal case
Installation DIN-rail kit and wall-mount kit
Power over Ethernet
PoE Standard IEEE 802.3af Power over Ethernet / PSE
PoE Power Supply Type End-Span
PoE Power Output Per port 54V DC, max. 36 watts
Power Pin Assignment 1/2 (+), 3/6 (-)
PoE Power Budget (max.)
60W @12V DC input
90W @24V DC input
120W @48V DC input
Max. Number of Class 2 PDs 4
Max. Number of Class 3 PDs 4
Max. Number of Class 4 PDs
4
Standards Conformance
Regulatory Compliance
FCC Part 15 Class A, CE
Stability Testing
IEC 60068-2-32 (free fall)
IEC 60068-2-27 (shock)
IEC 60068-2-6 (vibration)