(V3) Datasheet

ManualsBrandsPLANET Technology ManualsIndustrial SwitchesIndustrial 5-Port 10/100TX Ethernet Switch with 4-Port 802.3at PoE+

Data Sheet

ISW-504PT

Industrial 5-Port 10/100TX Ethernet Switch with

4-Port 802.3at PoE+

Cost-effective Full PoE+ Power Solution Ideal for Hardened Environment

Featuring Plug and Play designed to be installed in heavy industrial demanding

environments, the ISW-504PT is a PLANET Industrial-grade, DIN-rail type

Unmanaged Fast Ethernet PoE+ Switch with 4 10/100BASE-TX PoE+ ports, and 1

additional Fast Ethernet interface for video uplink.

The ISW-504PT is designed with redundant power system and is able to operate

reliably, stably and quietly in any hardened environment without affecting its

performance. It comes with a total power budget of up to 120 watts for different

kinds of PoE applications and operating temperature ranging from -40 to 75

degrees C in a rugged IP40 metal housing.

Extension of Ethernet Data Transmission Distance

The ISW-504PT has a built-in solid DIP switch providing “Standard”, "VLAN" and

“Extend” operation modes. By default, the ISW-504PT operates as a normal IEEE

802.3af/at PoE+ Switch in the “Standard” operation mode.

Interface

• 4 10/100BASE-TX Fast Ethernet IEEE 802.3at PoE+ RJ45

copper ports (Port-1 to Port-4)

• 1 10/100BASE-TX Fast Ethernet non-PoE RJ45 copper port

• One terminal block for master and slave power input (Power

Range: 12 ~ 48V DC redundant power)

• Hardware DIP switch for Standard, VLAN and Extend mode

selection; the Extend mode features 25-watt PoE transmission

distance of 250m at speed of 10Mbps (Only for Port-1 to Port-4)

Power over Ethernet

• Complies with IEEE 802.3at Power over Ethernet Plus, end-

span PSE

• Backward compatible with IEEE 802.3af Power over Ethernet

• Up to 4 ports of IEEE 802.3af/at devices powered

• Up to 120-watt PoE budget

• Supports PoE power up to 36 watts for each PoE port

• Each port supports 54V DC power to PoE powered device

• Auto detects powered device (PD)

• Circuit protection prevents power interference between ports

• Remote power feeding up to 100m in standard mode with 250m

in extend mode

Switching

• Hardware-based 10/100Mbps (half/full duplex), auto-negotiation

and auto MDI/MDI-X

• FeaturesStore-and-Forwardmodewithwire-speedlteringand

forwarding rates

• IEEE802.3xowcontrolforfullduplexoperationandback

pressure for half duplex operation

• 1K MAC address table size

• 1536 Bytes jumbo frame

• IEEE 802.1Q VLAN transparency

• Automatic address learning and address aging

• Supports CSMA/CD protocol

Industrial Case and Installation

• IP40 metal case

• DIN-rail, wall-mount design or side wall-mount design

• 12~48V DC redundant power with polarity reverse protect

function

• Fault alarm for power input failed

• Supports 5KV DC Ethernet ESD protection

• -40 to 75 degrees C operating temperature

• 4 real-time PoE power usage indicators

Standard Mode (default)

PoE IP Camera

PoE

100 meters (328 feet)

PoE

100BASE-TX UTP with PoE

ISW-504PT/ISW-514PTF

Summary of content (6 pages)

PAGE 1
ISW-504PT Industrial 5-Port 10/100TX Ethernet Switch with 4-Port 802.3at PoE+ Interface • 4 10/100BASE-TX Fast Ethernet IEEE 802.
PAGE 2
ISW-504PT The "VLAN" operation mode features with port-based VLAN function helps to prevent the IP camera’s multicast or broadcast storm from influencing each other.
PAGE 3
ISW-504PT Environmentally Hardened Design With the IP40 metal industrial case, the ISW-504PT provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets without air conditioning. It features a ventilated construction in which a cooling fan is not necessary, thereby making its operation noiseless.
PAGE 4
ISW-504PT Applications Industrial-grade PoE+ Switch for Building Automation and Security Suitable for buildings where security is strictly enforced, the ISW-504PT, with four Fast Ethernet 802.3at PoE+, in-line power interfaces, can easily build a power that can centrally control an IP phone system, IP surveillance system, and wireless AP group in the harsh Industrial environment.
PAGE 5
ISW-504PT Specifications Product ISW-504PT Hardware Specifications Fast Ethernet Copper Ports Five 10/100BASE-TX RJ45 auto-MDI/MDI-X ports (Port-1 to Port-5) PoE Injector Port Four ports with 802.3af/at PoE+ injector function (Port-1 to Port-4) Switch Architecture Store-and-Forward Switch Fabric 1Gbps/non-blocking Switch Throughput@64 bytes 0.74Mpps @64 bytes MAC Address Table 1K entries Flow Control IEEE 802.
PAGE 6
ISW-504PT Standards Compliance IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3x Flow Control and Back Pressure IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus Environment Operating Temperature -40 ~ 75 degrees C Storage Temperature -40 ~ 85 degrees C Humidity 5 ~ 95% (non-condensing) Ordering Information ISW-504PT Industrial 5-Port 10/100TX Ethernet Switch with 4-Port 802.3at PoE+ (-40~75 degrees C) Related Product ISW-514PTF Industrial 4-Port 10/100TX 802.