User's Manual

- 75 -
With this feature, you don’t have to configure recording all calls for the extensions which may cause heavy
system resource use if some call recordings are not required.
 Intercom: The intercom feature code allows you to intercom one extension only. You don’t have to create a
“Paging and Intercom” group for only one extension if you intend to intercom with only that extension.
 Paging: The paging feature code allows you to page one extension only. It’s the same as the intercom feature
code, the only difference between paging feature code and intercom feature code is by using intercom
feature code both sides can talk to each other but using paging feature code, only the caller can talk to the
called party.
 Audio Console: A speaker could be connected to the 3.5mm audio out (available on IPX-2200 and IPX-2500)
interface, extension user could dial *911 to deliver a public address from the audio out interface.