User's Manual

- 49 -
 Call recording: To enable or disable call recording on the trunk/trunks. To enable recording you have options
to record inbound calls only, outbound calls only or both inbound and outbound calls.
 Overlap Dial: Overlap dialing mode (sending overlap digits).
 Outbound CID: The number you want to display to the called party.
 Reset Interval: To set the time in seconds between restart of unused B channels.
 Pri Indication: To enable this to report Busy and Congestion on a PRI using out-of-band notification.
 Switch Type: To set the type of PRI switch being used by the telephony provider.
 Prompts Language: Custom a system voice prompts language for the callers calling in from this trunk.
 Fax Detect: Enable/disable fax detection on this trunk.
 Dial Permission: Custom dial permission for this trunk, by default it uses the “Extension” dial permission.
Configure only if this trunk is used for PBX integration, so calls coming from the other side can dial out from
this IPPBX trunk directly. DO NOT change unless you fully understand how this feature works.
 Preferred outbound CID: To set preferred outbound CID of this trunk of the extensions.
BRI Trunks (IPX-21BRv2)
Path: Telephony -> Outbound Control -> Trunks
If your IPX-2200 or IPX-2500 IPPBX system has 4BRI module installed, you’ll have 4 BRI trunks available for inbound
and outbound phone calls.
Click on the button to configure the BRI trunk when needed.