User's Manual

- 97 -
 Route: The route entries adjust the local routing table, telling it which network to route over the VPN.
 Client-to-Client: Client-to-Client can enable intercommunication between clients.
Once configurations are done, click on the button to save the configurations and you may create
certificates for the OpenVPN clients now. Each VPN client needs a certificate to be able to connect to the server.
OpenVPN server on IPPBX system can connect up to 20 clients.
Each certificate entry created here is for an OpenVPN client. Download the certificate and extract files inside the
package, 3 files you’ll get and they should be uploaded on a client to be able to connect to this server.
Finally turn on the enable switch to enable OpenVPN server.
OpenVPN Client
To configure OpenVPN client, please click on the button to show the configurations.
The certificate files downloaded from the OpenVPN server should be uploaded here.
In the CA Certificate field upload the ca.crt file.
In the Client Certificate field upload the xxxx.crt file.
In the Client Key field upload the xxxx.key file.
When done, click on the button to configure the OpenVPN client to connect to the server.