User's Manual

- 32 -
Mail server will be used to send out email notifications from the IPPBX system. Please select a mail service
provider from the list. Supported mail service providers’ default settings will be filled in automatically. If the mail
service provider of yours is not in the list please choose “Other”.
Once done, please click on button, now system will reboot for new settings take effect. If IPX-330 or
IPX-2100, you’ll have to wait around 4 minutes then refresh the page. If IPX-2200 or IPX-2500, it will take around 2
minutes to reboot, after this please refresh the page. Now you should see the login page like the screenshot
shown below.
Please use the admin credentials you defined during the installation wizard to sign in.
The admin user name and password are defined by during the installation wizard process. If you have skipped the
wizard, you’ll need to log in with the default username and password which are both “admin”. Once you have
modified the network profile during the quick installation wizard or after admin login, then you can power off and
deploy the IPPBX system to your local LAN, and then power it on for further configurations.
(Default IP) For increased security, please use https to access IP PBX.
For security reason, please change and memorize the new password after this first setup.
Default WAN IP: https://172.16.0.1
Default LAN IP: https://192.168.0.1
Default User Name: admin
Default Password: admin