User's Manual

- 27 -
Installation Procedure
New System Setup Wizard
Step 1. Connect a PC directly with the IP PBX on WAN or LAN port. Default IP of WAN port is 172.16.0.1, and
default IP of LAN port is 192.168.0.1. Please change the PC IP address to 172.16.0.xx if you have
connected WAN or 192.168.1.xx if you have connected LAN.
Step 2. Start a web browser. The browser should be IE11, Firefox or Google Chrome.
Step 3. Enter the default URL of WAN port “https://172.16.0.1” or enter URL of LAN port “https://192.168.0.1”
into the browser address bar to access its Web interface.
Step 4. Now you should be made known by a security warning. Please ignore the warning and proceed to
access the IP PBX Web interface.
Step 5. By now you should have seen the Quick Installation Wizard. Please follow the wizard to go through a
few steps of basic settings. Or you can skip the installation wizard.
 Step 1: Wizard Language
You may skip the wizard here by clicking on button. Or choose your native language to begin with the
wizard, if it’s not in the list then choose one that you familiar with. Once done, please click on button to
continue.